Filter
Top Products
14. IQ Network
Image 14-11
How to add projectors to a group ?
1. Click on the projector to be added in the projector list
2. Drag the projector down to the projector group.
The projector is added to the group.
Addinga projectorto agroupcan alsobe doneby using the“Copy + Paste”methodon theright mouse button
menu.
How to connect to a projector or group of projectors ?
1. Double click on the projector or group of projectors
A green dot appears, indicating that the projector is present on the network and working properly (image 14-12)
The name of the projector or group is now displayed in the upper part of the screen and indicates that the communication has
been set (image 14-13)
Image 14-12
connected and active projector
A connected and active projector
Image 14-13
A connected and active projector
When connected to a group of projectors, some controls may be disabled.
In general, controls will only be selected if this is the status of all projectors in the group.
Sliders will be set to a particular value only if this is the same on all projectors in the group, otherwise they
will be positioned centrally with a dash in the value box. When the slider is moved the box will show the new
value and this value will be sent to all projectors in the group.
Labels such as Current Source in the general page will only be shown if the string value is the same on all
pro
jectors, otherwise a dash will be shown
The Target information block
The
target information block displays the main characteristics of the connected projector or group of projectors.
This gives also an indication whether the communication setting has been successful or not.
R5976491 IQ PRO G500 01/02/2007
131