Filter
Top Products
4. Connections
DVI-Digital
• Single link
• Differential input voltage : 200mV - 800mV
DVI-Analog
• RGB input = 0.7 V
pp
±3dB
• TTL sync input : U
min
=2.5V
Pin assignment for the DVI connector.
Pin 1
TMDS DATA2-
Pin 15
Ground (for +5V)
Pin 2
TMDS DATA2+
Pin 16 Hot Plug Detect
Pin 3
TMDS DATA2/4 Shield
Pin 17
TMDS DATA0-
Pin 4
TMDS DATA4-
Pin 18
TMDS DATA0+
Pin 5
TMDS DATA4+
Pin 19
TMDS DATA0/5 Shield
Pin 6
DDC Clock
Pin 20
TMDS DATA5-
Pin 7
DDC Data
Pin 21
TMDS DATA5+
Pin 8 Analog Vert sync Pin 22
TMDS Clock Shield
Pin 9
TMDS DATA1-
Pin 23
TMDS Clock+
Pin 10
TMDS DATA1+
Pin 24
TMDS Clock-
Pin 11
TMDS DATA1/3 Shield C1
Analog Red
Pin 12
TMDS DATA3- C2 Analog Green
Pin 13
TMDS DATA3+ C3
Analog Blue
Pin14 +5Power
C4 Analog Hor Sync
C5 Ground
How to select the DVI input via the RCU?
1. Press 7 on the RCU.
The internal system detects automatically the DVI s
ource. If at the same time a digital DVI and analog DVI source is connected
and switched on, the digital DVI source will be displayed.
How to select the DVI input via the menu structure?
1. Press on the thumb wheel or press ENTER on the RCU to activate the menus.
The main menu will be displayed on the screen. (menu 4-1)
2. Turn the thumb wheel or use the up or down arrow keys to select Input selection.
The input selection menu will be displayed. (me
nu 4-2)
3. Turn the thumb wheel or use the up or down arrow keys to select 7DVI.
4. Press the thumb wheel or press ENTER on the RCU.
The internal system detects automatically the DVI source. If at the same time a digital DVI and analog DVI source is connected
and switched on, the digital DVI source will be displayed.
Solaris LC40
Select input
Image settings
Audio settings
PiP settings
Compact PC Control
Advanced settings
Standby
Back
Menu 4-1
Select input
1. Video
2. RGB
3. S-Video
4. HD-SDI/DVI/Audio/RGB
5. SDI
6. RGB
7. DVI
8. Compact PC
Configure input 2
Back
Menu 4-2
R5976672 SOLARIS LC40 13/01/2005 15