Filter
Top Products
12. Advanced Settings
[on] : film mode detection is enabled.
[off] : film mode detection is disabled.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Film mode detection [ON]
Video AGC
Display Settings
Installation
Service
Back
Menu 12-16
12.7 Video Gain
About Video Gain
The automatic gain control for video and S-Video sources can be switched off. Then it is possible to adjust the gain manually. When
a YUV video signal, no AGC is available but the video gain can be adjusted.
How to adjust the video gain manually
1. Select Advanced Settings .
2. Press ENTER to activate.
The Advanced Settings menu will be displayed. (menu 12-17)
3. Select Video gain.
The Video gain menu will be displayed. (menu 12-18)
4. For Video and S-Video, select AGC. For YUV video, step 6.
5. Press ENTER to toggle between [ON] and [OFF].
ON
Automatic gain control active, no manual video gain adjustment possible.
OFF
Automatic gain control is disabled, manual video gain control is possible.
6. To adjust the video gain control, select Video gain.
A slider box appears.
7. Use ↑ or ↓ to change the video gain.
Nominal position : 100
Adjustable between 50 and 150.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Film mode detection [ON]
Video AGC
Display Settings
Installation
Service
Back
Menu 12-17
Video Gain
AGC : [OFF]
Video gain
Back
Menu 12-18
12.8 Display Settings
Overview
• Rotate
• Backlight
70
R5976672 SOLARIS LC40 13/01/2005