Filter
Top Products
B. Optional Mounting Equipment
B. OPTIONAL MOUNTING EQUIPMENT
Overview
• Wall Mounting Support
• Table mounting support
B.1 Wall Mounting Support
B.1.1 Kit content
Overview
Image B-1
B.1.2 Horizontal Wall Mounting Support
How to mount
1. Use the center cross (A) which indicates the middle of the Solaris LC40 to mark the drill holes (B) for the wall support.
The diagonals of the Solaris LC40 must cross each ot
her in the center of the center cross, see image B-5. image B-2)
Note: Attention, always mount the bracked with handle D at the top side.
2. Put the security handle (D) right up.
3. Slide a wall spacer over each bolt. (image B-3)
4. Turn the four bolts into the backside of the Solaris LC40 (A). (image B-4)
5. Hook the Solaris LC40 with the four bolts into the h
oles (C) of wall mount (image B-2).
6. Slowly lower the panel until it rest on the support.
7. Close the security handle by pushing it to the left.
Your panel is mounted to the wall. (image B-5)
R5976672 SOLARIS LC40 13/01/2005
85