Filter
Top Products
4. Connections
4. Press the thumb wheel or press ENTER on the RCU.
Solaris LC40
Select input
Image settings
Audio settings
PiP settings
Compact PC Control
Advanced settings
Standby
Back
Menu 4-14
Input Selection
1. Video
2. RGB
3. S-Video
4. DVI
5. SDI
6. RGB
7. DVI
8. Compact PC
Configure input 2
Back
Menu 4-15
4.2.8 HD-SDI input module (optional)
This input slot is NOT hot-pluggable. Make sure the system is switched off before inserting or removing an
input module!
Specifications
SDI/HDSD I
INPUT
INPUT
OUT
1
2
Image 4-8
HD-SDI input module
SDI/HD-SDI input 1: BNC
SDI/HD-SDI input 2: BNC
Auto input detection between input 1 and input 2
SDI/HD-SDI output : BNC (= loop through)
Typical : 0.8 V
pp
75 Ω terminated
Output impedance : 75 Ω
How to configure the HD-SDI input
1. Press the thumb wheel or press ENTER on the RCU to activate the menus.
The main menu will be displayed on the screen. (menu 4-16)
2. Turn the thumb wheel or use the up or down arrow keys to select Input Selection.
The input selection menu will be displayed. (menu 4-17)
3. Turn the thumb wheel or use the up or down arrow keys to select Configure HD-SDI.
The configuration window will be displayed. Depending on a previous setting, two different view are possible. (menu 4-18)
4. To set the selection automatic, select Autom atic select and press ENTER to toggle to [Yes]. (menu 4-20)
5. Select Priority and press ENTER to toggle between [input 1] and [input 2].
When two input signals are connected, the one set in Select input will have priority.
6. To set the selection on non automatic, select Automatic Select and press ENTER to toggle to [No]. (menu 4-21)
7. Select Select input and press ENTER to toggle between [input 1] and [input 2].
R5976672 SOLARIS LC40 13/01/2005
21