Filter
Top Products
12. Advanced Settings
12.10.3.1RS232 address
How to change the RS232 address ?
1. Press ENTER to activate the menu structure.
2. Select Advanced Settings and press ENTER to activate.
The advanced settings menu will be displayed. (menu 12-51)
3. Select Service.
4. Press ENTER to select.
The service menu will be displayed. (menu 12-52)
5. Select Serial communication.
6. Press ENTER.
The serial communication menu opens. (menu 12-53)
7. Select RS232 address and press ENTER.
The RS232 address change menu opens. (menu 12-54)
The first digit will be highlighted.
8. To change the address :
Use ↑ or ↓ to change the value.
For a highlighted value, use ↑ or ↓ to change this value or enter the desired value with the digit keys on the R
CU
To go to the next digit : use the ← or → to highlight another value.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Film mode detection [ON]
Video AGC
Display Settings
Installation
Service
Back
Menu 12-51
Service
Identification
IR address : 004
Serial communication
IR locking
Restore factory defaults
Back
Menu 12-52
Serial Communication
RS232 address : 001
Baudrate : [57600]
Back
Menu 12-53
RS232 address
Enter new value :
[001]
Back
Menu 12-54
12.10.3.2Changing the baudrate for RS232 communication
How to change the baudrate ?
1. Press ENTER to activate the menu structure.
2. Select Advanced Settings and press ENTER to activate.
The advanced settings menu will be displayed. (menu 12-55)
3. Select Service.
4. Press ENTER to select.
The service menu will be displayed. (menu 12-56)
5. Select Serial communication.
6. Press ENTER.
The serial communication menu opens. (menu 12-57)
7. Select Baudrate.
8. Press ENTER to scroll through the different possible values.
R5976672 SOLARIS LC40 13/01/2005
79