Filter
Top Products
12. Advanced Settings
12.8.1 Rotate
Rotate is only available when the optional rotator module is inserted in the Solaris LC40.
About rotate
With the rotate function it is possible to go from a normal landscape image to a portrait image.
Image 12-6
Display rotation
A Landscape
B Portrait, with same input image
If you do not change anything to the viewport, the image will be compressed and stretched until it fills the display.
How to activate a rotation
1. Select Advanced Settings .
2. Press ENTER to activate.
The Advanced Settings menu will be displayed. (menu 12-19)
3. Select Display Settings.
4. Press ENTER to activate.
The Display settings menu will be displayed. (menu 12-20)
5. Select Rotate.
6. Press ENTER to toggle between Landscape and portrait.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Film mode detection [ON]
Video AGC
Display Settings
Installation
Service
Back
Menu 12-19
Display Settings
Rotate : landscape
Backlight
Back
Menu 12-20
12.8.2 Backlight
About backlight
The backlight function can be used to adjust the display brightness for the different environment conditions. E.g. when installed in
an environment with a lot of light the backlight should be increased.
R5976672 SOLARIS LC40 13/01/2005
71