Filter
Top Products
13. Installation menu
Image 13-5 Image 13-6
Entering the new projector address ?
1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 and 255.
How to change the common RC5 address ?
1. Press MENU to activate the Tool ba
r
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Project or addre ss
5. Press ENTER
A dialog box appears on the screen.
Entering the new common address ?
1. Enter the new projector addr
ess with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between
0or1.
13.3 Orientation
Projector orientations
Depending on how the projector is oriented, the projector’s internal settings have to be adapted.
How to change the orientation ?
1. Press MENU to activate the Toolbar
2. Press → to select the Insta llation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Orie
ntation
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired orientation (image 13-7)
7. Press ENTER
The projection is adapted and a black bullet shows the active configuration.
R5976694 IQ PRO R500 01/02/2007
117