Filter
Top Products
15. iQ Network
• standby on/off
•lampmode
• source selection
• switching effects
• background setting
• all PiP settings (layout, window)
• Image settings
• lens adjustments
The control manager
The control interface in the client software is divided into 5 subscreens, image 15-27:
• General
• source selection
•PiP
• image settings
• advanced
Image 15-27
The control interface: the general sub screen is active (see tool bar)
15.5.2 How to use the control manager?
How to use the control manager?
1. Choose the sub screen by clicking on the desired item on the tool
bar in the upper part of the control interface
The active sub screen is indicated with a blue spot
15.5.3 General
What can be done ?
Basic controlling, monitoring and general parameter setting of the projector can be done in this screen, image 15-27.
• 3 buttons ON, STANDBY and PAUSE
•Thetarget information part gives the main characteristics of the projector
• 2 buttons allow to switch between dual and the single lamp mode
How to change the general settings?
1. Click on the lamp mode button to select the desired mode
A blue spot indicates the active mode
2. Click on one of the three buttons to start up, pause or pu
t in standby the projector
A green led indicates the status of the projector.
146
R5976694 IQ PRO R500 01/02/2007