Filter
Top Products
2-6
Installation Guidelines
5976135 BARCOSIM 6 21032000
Note
Note, only important if more than one projector is installed in the room :
1. the common address can be zero (0) or one (1). The standard RCU are setup for common address zero. To change the common
address of the RCU, contact a BARCO service center. If it is necessary to program the projector address into the RCU, see chapter
'Controlling'.
2. projector address has to be reprogrammed everytime the battery is changed, the RCU will always switch to the default address.