Filter
Top Products
4-1
Connections
5976135 BARCOSIM 6 21032000
4
COMPUTER
TRIG
MOUSE
RS232 IN RS232 OUT COMM. PORT
RC
R
GBH/CV
2
1
Fuses
Warning
For continued protection against fire hazard :
- refer replacement to qualified service personnel
- ask to replace with the same type of fuse.
Fuse type : T10 AH/250V
Switching on
Use the power switch to switch on.
When '0' is visible, the projector is switched off.
When '1' is visible, the projector is switched on.
When switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red.
CONNECTIONS
Power connection to Projector
AC Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector
at the front of the projector.
The power input is auto-ranging from 90 to 240 VAC.
100-240 V
6-2.5 A
50-60 Hz