Filter
Top Products
7-2
Random Access Adjustment Mode
5976135 BARCOREALITY SIM6 21032000
Select with é or ê
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
AUDIO TUNING
GEOMETRY
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with é or ê
then <ENTER>
<EXIT> to return.
xxxxXxxxx : active pixel rating
x : source number
xxx : file extension, first character is C (for custom made files) or S (for standard files).
The second and third character is used for a following number (=file index)
file index for custom files : 00 to 63.
xxxxxxxx.xxx x xxxxXxxxxi
i or blank : i = interlaced, blank = not
interlaced
Starting Up
Push the cursor key é or ê to highlight 'Random Access' and then press ENTER.
menu 1
menu 2
Possible File Manipulations.
The following file manipulations are possible :
- Load : installation of a file for a new source.
- Edit : editing a loaded file to the source specs.
- Rename : renaming a file.
- Copy : copying a file to a new file.
- Delete : deleting an existing file.
- Options : way of sorting the files.
File Annotation.
xxxxxxxx : base name, 8 characters.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with é or ê
then <ENTER>
<EXIT> to return.
Picture Service
Connecting a new Source.
Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the
most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When
there is a little difference, the file can also be loaded and then edited until the source specs are reached.
Note : file loading can be done automatically (see File Options, in this chapter).
Files with a ~ in front of the file name are tempory files. These files will be deleted when switching to another source.
Start up the File Service.
To enter the File Service, handle as follow :
1 Pushing the cursor key é or ê to highlight 'File Service' (menu 1).
2 Press ENTER to select.
The File service menu will be displayed (menu 2).
Note : EXIT returns to the Path selection menu.
ADJUST returns to operational mode.