Filter
Top Products
4-5
Connections
5976135 BARCOSIM 6 21032000
Possible indication :
RGB [HS&VS] = RGB analog signals, separate sync is horizontal and vertical sync.
RGB CS = RGB analog signals, separate sync is composite sync.
RGB CV = RGB analog signals, separate sync is composite video or tri-level sync.
RGB-SOG = RGB analog signals, sync on green is composite sync.
²COMPONENT VIDEO - CS = separate sync is composite sync.
²COMPONENT VIDEO = component video with composite sync on Y or composite tri-level sync on Y.
²VIDEO
²S-VIDEO
² Optional for BARCOREALITY SIM6
Note for RCVDS05 users
When using an RCVDS 05 with a 5 cable output module, connect these 5 cables to this 5-cable input slot (slot1) of the projector.
All sources of the RCVDS can now be accepted by the projector.
Audio connection (optional)
Connect the audio input to one of the 3 audio inputs.
See 'audio configuration' in this chapter for more explanation.
Computer input/Monitor output²
² Monitor output is optional for the SIM6.
Connect the output of the graphical card of the computer to the Computer input of the projector (connection < 60 cm) or insert an
interface between the output of the computer and the input of the projector.
Connect the monitor of the computer to the monitor output of the projector.
This monitor output is only available when the computer input is used as input.
SDI
SDO
S-VIDEO
VIDEO
COMPUTER
IEEE 1394
TRIG
MOUSE
MONITOR
RS232 IN RS232 OUT
AUDIO IN AUDIO IN AUDIO IN
AUDIO IN
COMM. PORT
RC
CB
A
RGBH/CV
5
6
2
1
43
Pin configuration of the D15 connector :
1RED
2 GREEN
3 BLUE
4 loop through to monitor
5 ground
6 ground
7 ground
8 ground
9 loop through to monitor
10 ground
11 loop through to monitor
12 loop through to monitor
13 horizontal/composite sync
14 vertical sync
15 loop through to monitor