Filter
Top Products
7-13
Random Access Adjustment Mode
5976135 BARCOREALITY SIM6 21032000
To change the Color depth value :
1 Push the cursor key é or ê to highlight 'Color Depth' (menu 1).
2 Press ENTER to select.
3 Change the value by pushing the cursor key ç or è until the desired dark color saturation is reached (menu 2).
Adjustment range : 0 ... 8
Default : 4
4 Press EXIT to return to the Picture Tuning menu.
0
COLOR DEPTH
8
4
Input Balance
Why adjusting the input balance ?
The input balance is normally correct adjusted in the factory. But due to signal distribution or signal transmission, a color imbalance
can be the result. This imbalance can be adjusted source by source for color critical applications. These adjustments influence
only the actual custom adjustment file. This procedure is not so easy.
Attention : Before starting the Input Balance function, generate a signal with dominant black and white areas.
How to adjust the input balance ?
The default values are normally loaded when selecting a source. If the image is not as desired, adjust for this source as follow :
1 Push the cursor key é or ê to highlight 'Input Balance' (menu 1).
2 Press ENTER to select.
The Input Balance menu will be displayed (menu 2).
Start with the Black Balance :
1 Push the cursor key é or ê to highlight 'Black Balance' (menu 2).
2 Press ENTER to select.
3 Adjust the Brightness to a maximum value until there is just no green noise visible in the black areas.
4 Adjust with the cursor key é or ê or ç or è until there is no red or blue noise visible in the black areas.
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
menu 2
Black Color
Purpose
Modifies the color of the black image for color matching between projectors.
To change the black color :
1 Push the cursor key é or ê to highlight 'Black Color' (menu 1).
2 Press ENTER to select.
3 Change the color of the black image by adding a certain amount of Red (R), Green (G) or Blue (B).
Notice : Deviation from R=0, G=0, B=0 will result in a lower contrast ratio for the projector.
Select with é or ê
then <ENTER>
<EXIT> to return.
PICTURE TUNING
CTI [ON]
MOTION COMPENSATION
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
COLOR DEPTH
BLACK COLOR
INPUT BALANCE
menu 1
PICTURE TUNING
CTI [ON]
MOTION COMPENSATION
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
COLOR DEPTH
INPUT BALANCE
BLACK COLOR
R
G
B