Filter
Top Products
99
APPENDIX E: Installing the ServSwitch Overlay Option Board
Appendix E: Installing the
ServSwitch Overlay Option Board
(SW720C-R3)
E.1 Introduction
The ServSwitch Overlay Option Board, our product code SW720C-R3, is an extra
circuit board that can be installed in the current generation of regular
ServSwitches and ServManagers to add on-screen menus to the Serv unit’s
functions. Once the Board is installed, you can bring these menus up on the
shared monitor’s screen by pressing the hotkey combination left-[Ctrl] [F12]; the
Board simply inserts these menus into the monitor’s video feed, and does not
interfere with your CPUs’ software or hardware at all. When a regular ServSwitch is
converted this way, it becomes functionally identical to a ServSwitch Ultra.
Refer to Chapter 5 for descriptions of all the Board’s operating features and how
to access them once the Board has been installed.