Filter
Top Products
112
OMNISCANNER
NOTE
The list of Autotests varies depending on the kind of Autotest that was
performed.
(See Chapter 5, Measurements, for detailed information about each
measurement screen.)
Use the up-arrow and down-arrow keys on your keypad to highlight a test.
Press ENTER to open the test result screen for that particular test.
Use the left-arrow or right-arrow on your keypad to quickly page through all test
results.
NOTE
If the (Save Graphs) or (Save with Graphs to MMC)
option was selected when saving the Autotest, graphs associated with
NEXT, Attenuation, Return Loss, PSNEXT, ELFEXT, ACR, PSELFEXT,
and/or PSACR are available when viewing Autotest results. Only the
graphs that were selected in the Autotest Options screen will be saved.
(See Chapter 3, Setup: Autotest Options for information about selecting
graphs to be saved.)
Press ESC to return to the PROJECT NAME screen.
Press ESC to return to the RESULTS screen.