Filter
Top Products
91
CHAPTER 5: Measurements
1. Connect the cable to be tested to OMNIScanner.
2. Insert the RJ-45 Office Locator adapters into wall outlets in the offices you
wish to identify. You can connect any or all of the twelve Office Locators
before beginning your test.
3. At the patch panel, run the Office Locator function to identify which office is
connected to a given port.
OMNIScanner will identify office locations and display the ID of the Office
Locator adapter found at the far end of the attached cable.
If you are testing a cable that does not have an Office Locator attached at the
other end, OMNIScanner will display a question mark.