Filter
Top Products
59
For fiberoptic cabling the View Autotest Detail screen shows the
standard being used in the titlebar.
The tests that are performed during an Autotest are clearly marked .
If an precedes the test name, the test will be performed for information
purposes only. The results are not used to determine PASS or FAIL.
The View Autotest Detail screen displays the current scanner configuration for
multimode fibers. Use the function key to view the limits for single-mode
fibers.
When viewing limits for equation-based Autotests like TIA 568A, ISO 11801, and
100BASE-F, the Loss per km (kilometer) will be displayed.
ii
CHAPTER 4: Setup