Filter
Top Products
10
OMNISCANNER
compared against the selected LAN standard for instant PASS/FAIL analysis.
OMNIFiber measures loss at 850 and 1300 nm over multimode fiber and at 1310
nm over single-mode fiber.
Up to 1000 Autotests can be saved to nonvolatile memory. Saved results can be
easily uploaded to the PC with Scanlink software.
1.5 Scanlink Tools Software
PC-based software expands OMNIScanner’s user interface and aids with the
management of projects. Scanlink Tools consist of the OMNIScanner
Configuration software, the Scanlink Upload software, and the OMNIScanner
Remote Control software. These programs allow you to store, retrieve, manage,
edit, and print network cabling information. Scanlink Tools; provide the ability to
create professional reports, remote control OMNIScanner, and define cable and
project configurations that can be downloaded to OMNIScanner.
1.6 OMNIScanner’s Display
Scanner Display Function
1-2 or 12/36: The paired numbers in the display indicate wire pairs. For
example, 1-2 indicates the wire pair of pins 1 and 2. 12/36
indicates two wire pairs tested, the first pair of pins 1 and
2, and the second pair of pins 3 and 6.
Pop-up lists: Pop-up lists are available by pressing ENTER when the
cursor is located on user-definable fields. A predefined
selection list will appear, and the rest of the display will be
inactive.
Spin Control: The spin control is available on editable fields that allow
for increasing or decreasing numeric values by
depressing the up-arrow or down-arrow key.
Scrollbars: Use the up-arrow and down-arrow key on the keypad to
move up and down in a scrollable screen.
Graph: Use the left-arrow or right-arrow keys to move the graph
cursor on the frequency axis. Us the up-arrow or down-
arrow to zoom in and out of graphs.