Filter
Top Products
17
1.12 OMNIFiber’s LED Indicators
LED Color Description
850 nm Green OMNIFiber is
transmitting at 850
nm
850 nm Green OMNIFiber is
(flashing) transmitting
modulated light at
850 nm
850 nm Orange Part 1 of Two Way
Test completed,
switch fibers
1300/ Green OMNIFiber is
1310 nm transmitting at 1300/
1310 nm
1300/ Green OMNIFiber is
1310 nm (flashing) transmitting
modulated light at
1300/1310 nm
1300/ Orange Part 1 of Two Way
1310 nm test completed,
switch fibers
1.13 Attaching the OMNIScanner Fiber Adapters
NOTE
Both OMNIFiber adapters have dust caps to protect the ST connectors
from dirt. Keep the ST connectors covered when the Fiber Adapters are
not in use. This helps to ensure that contaminants from handling fiber
do not affect test measurements.
NOTE
Both OMNIFiber adapters have 160-pin connector covers. Keep the 160-
pin connectors covered when the Fiber Adapters are not in use.
To attach a fiber adapter to OMNIScanner, proceed as follows:
1. Remove the 160-pin connector cover from the OMNIFiber adapter by gently
pressing the black pushbutton latches. The cover will be released.
CHAPTER 1: Introduction