Filter
Top Products
29
CHAPTER 2: Getting Started: Twisted Pair Networks
4. The Autotest screen is displayed while Autotest is running.
The Autotest and the Cable name are displayed at the top of the screen. A
gauge indicates the test progress. Tests will be listed with their individual
(PASS) or (FAIL) results as soon as a test is completed.
Once all tests have been performed, the overall test Result: is displayed as
PASS or FAIL.
NOTE
The list of tests varies depending on the kind of Autotest that was
performed.
An Autotest will PASS if all the selected tests meet the specified criteria. An
Autotest will FAIL if one or more selected tests failed.
2.6.1 S
AVING
T
WISTED
P
AIR
A
UTOTEST
R
ESULTS
1.Press (Save) from the Autotest screen to open the SAVE AUTOTEST
screen, where the Autotests can be stored into OMNIScanner’s memory.
2. The Project field contains the name of the project.