Filter
Top Products
54
OMNISCANNER
S
ET
R
EFERENCE WITH THE
OMNIF
IBER
A
DAPTERS
NOTE
The fiber reference expires each day at midnight. It must be set each
calendar day that OMNIFiber adapters are used. The reference value
should also be set every time a fiber is removed from either OMNIFiber
TX port.
A reference value must be established before a loss measurement can be
calculated.
With the OMNIFiber adapters attached to OMNIScanner2 and OMNIRemote,
and the launch cable(s) in place, select Set Reference to display the Select Method
screen.
NOTE
The Select Method screen will not be displayed if a fiber is attached to
the TX and RX ports of the same OMNIFiber adapter (Loopback).
To select a Reference Method A, B, or C, press the appropriate function key.
See Chapter 8, Fiberoptic Reference, for detailed information about
establishing a reference value with fiberoptic launch cables.