Filter
Top Products
118
OMNISCANNER
NOTE
This method is called “Method A” in TIA-526-14A and “Method A.2” in
TIA-526-7.
1. Connect a launch cable to the fiber adapter that is attached to OMNIScanner.
The black fiber attaches to the TX (transmitter) port and the white fiber to
the RX (receiver) port.
2. Connect a launch cable to the fiber adapter that is attached to OMNIRemote.
The black fiber attaches to the TX (transmitter) port and the white fiber to
the RX (receiver) port.
3. Use a connector adapter to mate the two black fiber connectors.
4. Use a connector adapter to mate the two white fiber connectors.
5. Set the Reference.
6. Disconnect the connectors from the connector adapters without disturbing
the fiber connections to the OMNIFibers.
7. Set the connector adapters aside.
8.3.3 M
ETHOD
C: T
HREE
J
UMPER
R
EFERENCE
M
ETHOD
This method is used when the link includes:
• the loss of the cable plant
NOTE
This method is called “Method C” in TIA-526-14A and “Method A.3” in
TIA-526-7.
RX
TX
850 nm
1300/1310 nm
RX
TX
850 nm
1300/1310 nm
2 m Launch Cable
2 m Launch Cable
Coupler
METHOD A