Filter
Top Products
64
OMNISCANNER
A fiber cable’s Graded Refractive Index (GRI) differs depending on the
supplier. To receive accurate length results, OMNIScanner allows you to define the
GRI values for both wavelengths.
To change the fiber’s mode, use the up-arrow or down-arrow key to highlight
the mode. Press Enter to select Multimode or Single-mode.
Press (Save) to save the edited cable into the Custom Cable folder.
Press ESC to return to the SETUP screen.
4.5 Projects
Select Projects to display the Projects screen. It contains a list of all projects that are
currently stored in OMNIScanner. Predefined default projects are: TIA, ISO,
VENDOR, MICROTEST, IEEE, ATM, AS/NZ, ANSI. OMNIScanner’s project
feature allows you to organize test specifications, cable types, and test results into
Projects.
If there are tests stored in a project, the folder will appear full ; otherwise
it will be empty .
Use the up-arrow or down-arrow key to highlight a specific Project.