Filter
Top Products
66
OMNISCANNER
Press (New) to create a new project.
New Project will be displayed in the Name: field. Press ENTER to edit the name.
The first and last Circuit ID fields contain the default Circuit ID from the Project
that was highlighted when the (New) key was pressed.
NOTE
New and edited project names are placed at the bottom of the list in the
PROJECTS screen. OMNIScanner can store up to 16 projects.
E
DITING A
C
IRCUIT
ID
To edit or create a Circuit ID, highlight an item in the PROJECTS screen and press
(New) or (Edit).
Use the down-arrow to highlight the First Circuit ID: field and press ENTER.
The Circuit ID field consists of 16 characters, which allows the sophisticated
construction of Circuit IDs. Each character can be incremented.
The example shows how to quickly create an incremental Circuit ID.
Enter MT-F01 (MICROTEST - Floor 01) -PP01 (-Patch Panel 01) -P01 (Position
01) in the First Circuit ID: field.
Press ENTER to terminate the edit mode.
Use the down-arrow key to highlight the Last Circuit ID: field and press
ENTER.