Black Box TS1002A Barcode Reader User Manual


 
134
OMNISCANNER
A.5 Measurement Port (Test Interface)
Ultra-low Crosstalk test interface that supports testing of all four pairs
160-pin test interface connector, which exceeds 10,000 mating cycles
Variety of test cables and adapter modules support testing of BNC, 110 block,
and shielded modular jack and plug interfaces
A.6 Serial Port
Connector—DB9
Baud Rate—300 to 57,600 baud
Parity—None
Length—8 bits
Handshaking—None, RTS/CTS, and X-ON/X-OFF
A.7 Universal Serial Bus
Type: Self-powered device
Link: 12 MBps full-speed bulk transfer with two 128-byte FIFOs and automatic
retry
Connector: Type “B” receptacle
Recommended cable: Full-speed shielded twisted-pair with A-B plugs
(USB V1.1 compliant)
A.8 MultiMediaCard Interface
Link: 4.6 MBps SPI mode with 16-bit CRC
Format: 512-byte sector size, 32-bit FAT file system
Socket: Non-locking seven-contact with ejector
Recommended Media: Scandisk SDMB-xx or Infineon MultiMediaCard-F00xx
(xx denotes memory size in megabytes)