Filter
Top Products
43
CHAPTER 3: Getting Started: Fiber Optic Networks
4. Once the reference value has been set, OMNIScanner will display the FIBER
INFO screen.
5. Press ESC to return to the SETUP screen.
NOTE
If the test configuration changes, a new reference value needs to be
established.
3.5 Project Selection
A project name must be selected for test result management. Autotests and Cables
were previously assigned to a specific project through the use of the OMNIScanner
Configuration software. (See Chapter 9, Uploading and Printing for further
information about OMNIScanner Configuration.)
The Project feature is very useful for grouping test results and eases uploading
and sorting of Autotests stored in the scanner.
1. Use the up-arrow or down-arrow to highlight Project: and press ENTER.
2. Select the appropriate Project from the pop-up list and press ENTER.