Filter
Top Products
77
CHAPTER 5: Measurements
Tests that require the use of OMNIRemote will have small icons in the upper
right corner of the titlebar indicating whether the information on the screen is
pertinent for OMNIScanner or OMNIRemote.
Toggle between the screens by pressing to open the screen that contains
the information for OMNIScanner, and to display the information for
OMNIRemote.
NOTE
The PASS/FAIL criteria are based on the Autotest currently selected in
the Project screen.
Several measurements will display certain results in a graph format. When a
graph can be displayed, the (Graph) function key is available.
Press (Graph) to display test results for the highlighted pair or pair
combination.
Use the up-arrow or down-arrow key to magnify the area of the graph where the
cursor is located. The graph can be magnified 1x, 2x, 4x, or 10x.
Use the left-arrow or right-arrow keys to move the cursor within the graph.