Filter
Top Products
69
Use the down-arrow to highlight the other checkbox.
Press if you want OMNIScanner to automatically move to the failed test
result. The Jump to Fail box will be checked .
Use the down-arrow to advance to the Report: field and press ENTER. Select
Margin if you want OMNIScanner to report the result, measured in dB, for the
worst margin. Select Worst dB if you want the worst overall dB value to be
reported, as in OMNIScanner software versions prior to v4.0. Press ENTER to set
the default.
NOTE
Attenuation results in dB will always be reported for the worst value,
regardless of what is selected in the Report: listbox.
Use the down-arrow to highlight the Fiber Test Options checkbox. You will be
able to define the way fiber optic Autotests are performed.
Press if you want OMNIFiber to test the fiber link in both directions.
The Test in Both Directions box will be checked .
Press (Save) to save your changes and return to the SETUP screen.
Press ESC to discard all changes and return to the SETUP screen.
4.8 Autotest Save Options
Select Autotest Save Options to display the SAVE OPTIONS screen. This screen
contains several options that allow you to customize the way OMNIScanner will
save Autotests.
CHAPTER 4: Setup