Filter
Top Products
2-2 Connecting Peripherals
Connecting Peripherals
This section describes how to get your system connected and powered up. You
should have already unpacked your printer, using the instruction sheet included in
the shipping box.
You connect your keyboard and your mouse, if you have one, and then the power
cord, to begin setting up your system. (The USB connection is discussed in Placing
Your System Online on page 11-4.)
Figure 2-1. The label printer, side view.
Step 1: Plug the keyboard cable into the keyboard connector, shown in Figure 2-2.
Step 2: If you have a mouse, plug the mouse cable into the mouse connector, as shown in
Figure 2-1
ON/OFF
switch
Power
cord
USB port
Serial port
Keyboard
Mouse connector
memory
flashcard
port
Compact
Display
screen
Fuse
connector
Serial number
connector