Filter
Top Products
USER’S GUIDE
1–4
English: HS3 User’s Guide, Chapter 2
OPERATING AND STORAGE ENVIRONMENT
Please take note of the following information before using the printer.
Power Supply
Use the printer within the specified power range.
AC power: ±10% of the rated power voltage in your district
Frequency: 50 Hz (220 V– 240 V) or 60 Hz (110–120 V)
The power cord, including extensions, should not exceed 5 meters (16.5 feet).
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier, shredder and so on. If it is unavoidable
that you must use the printer with these appliances, it is recommended that you
use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
Environment
The printer should be installed near a power outlet which is easily accessible.
Use the printer only within the following ranges of temperature and humidity.
Ambient temperature: 10°C to 35°C (50°F to 95°F)
Ambient humidity: 20% to 80% (without condensation)
For optimum image quality it is recommended to use this printer within the
range:
Temperature: 15°C to 30°C (59°F to 86°F)
Humidity: 30% to 60%
Because the ink on printouts might flake off when rubbed or the print might
appear to be a lighter color if you use the printer out of this range, for optimum
print quality use the printer within the shaded range shown in the following
diagram.
Ventilate the room where you use the printer.
Place the printer on a flat, horizontal surface.
Keep the printer clean. Do not place the printer in a dusty place.
0
20 30
(°C)
10
(%)
80
60
40
20