Filter
Top Products
CHAPTER 3 PRINTER DRIVER
3–3
English: HS3 User’s Guide, Chapter 2
Paper Source
If your paper has difficulty feeding from the sheet feeder we recommend using the
Manual paper feed method. When using this method, you have to load paper
sheet by sheet.
When Dual is selected (HS-5300 only), the printer feeds paper from Feeder 1 first
and when paper in Feeder 1 runs out the paper source is automatically switched to
Feeder 2.
The paper source will be switched back to Feeder 1 again when the printer is turned
off and on again or the paper runs out in Feeder 2.
Copy/Page Order
Collate In multiple page jobs that are collated, for example, printing 2 copies
of a 3 page document, the printer prints Page 1, Page 2, Page 3, then Page 1, Page 2,
Page 3 in order.
In multiple page jobs that are uncollated, for example, for 2 copies of a 3 page
document, the printer prints Page1, Page1, Page 2, Page 2, Page 3, Page 3 in order.
When Collate is selected, the printer starts printing after processing all the print data
so that it takes a longer time for collated printing than uncollated copies.
Reverse Order When you want to get printouts in the correct order, use this
function. The printer spools all the job in your computer and sends the data starting
from the the last page to be printed. Since the printer prints from the last page
forwards, the printouts are stacked in the correct orderPage 1, 2, 3, ...Page 5. Please
note that this function takes more time.
Scaling
You can select the scalings as follows:
1 in 1/Free
You can reduce your document by 25%, 50%, and 75%.
Also, you can define the scaling from 25 to 100 % after selecting “Free.”
2 in 1 or 4 in 1
2 or 4 pages are printed on one sheet at a reduced size. You cannot specify
the scaling percentage manually.
1 in n
You can enlarge your document by the provided scalings.
✒ Note
If your application software contains a similar function to these, both settings
will be effective.