Filter
Top Products
CHAPTER 6 MAINTENANCE
6–13
English: HS3 User’s Guide, Chapter 6
RE-PACKING THE PRINTER
!
Caution
Whenever you transport the printer, use the packing materials which are
provided with your printer. Also, follow the steps below to re-pack the printer, or
the printer may be damaged.
Before Re-Packing the printer
Before your starting to re-pack the printer, you need to support the print head
and head gap lever with the Styrofoam block as shown below.
Figure 6-22 Insert the Styrofoam blocks
✒Note
You need to move the print head to the left by hand until it stops.
Do not insert the Styrofoam in the wrong direction as shown below.
GOOD BAD