Filter
Top Products
USER’S GUIDE
4–4
English: CS3 User’s Guide, Chapter 4
Shift + Test Button
Set the printer to off-line by pushing the Online Button first.
Pressing the
Test
button while holding down the
Shift
button starts the test
print. Check the printed test page and if you find any printing problems,
perform the print head cleaning as described below.
Release the two buttons immediately after pressing the
Test
button and the
DATA LED will start to blink. If it does not, the buttons were held down for too
long and you will need to start the test selection again.
✒ Note
Press the buttons gently. Do not press with too much force or hold the buttons
down for a long time. If you do the operation might now start.
Shift + Clean Button
Set the printer to off-line by pushing the Online Button first.
Pressing the
Clean
button while holding down the
Shift
button starts head
cleaning. If you see any problems on printouts, clean the print head and try
again.
Release the two buttons immediately after pressing the
Test
button and the
DATA LED will start to blink. If it does not, the buttons were held down for too
long and you will need to start the test selection again.
✒ Note
Do not open the top cover during the head cleaning operation.
Press the buttons gently. Do not press with too much force or hold the
buttons down for a long time. If you do the operation might now start.