Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–3
English: CS3 User’s Guide, Chapter 4
Online Button
The
Online
button alternately turns the printer on-line and off-line.
If you press this button during printing, the printer immediately stops printing
and ejects the paper. Pressing this button again prints the rest of the print data. If
you want to cancel printing, cancel the print job in your application first and then
reset the printer.
When the printer becomes off-line because of an error, the printer can recover
from some errors and return to on-line by pressing this button.
When performing cleaning or resetting, the printer must be set to off-line first.
Reset Button
The
Reset
button is valid only in the off-line mode.
The printer is reset and restored to the user default settings.
✒ Note
Remember that the
Reset
button clears data from the printer memory.
FF/Cont Button
This button is valid only in the off-line mode.
If the
Data
LED is on, pressing the
FF/Cont
button prints any data remaining
in the printer after turning the printer off-line.
When you select manual feed in your application, the printer alerts you to load
paper in the manual feed slot by blinking the
Manual
LED. Press this button to
start feeding the paper.
If a recoverable error occurs, press the
FF/Cont
button to recover from the error
and return to the on-line state.