Filter
Top Products
USER’S GUIDE
5–2
English: HS3 User’s Guide, Chapter 5
MEMORY EXPANSION
Both of the the HS-5000 and HS-5300 have 24Mbytes, 8Mbytes on the board
and 16Mbytes in the one of the memroy expansion slots. There are 2 slots for
optional memory and the memory can be expanded up to a total of 72 Mbytes.
You need to install commercially available single in-line memory modules
(SIMMs) in those slots to expand the memory.
In general, the SIMM you install must have the following specifications:
Type: 72 pin and 32 bit or 36 bit output
Access Time:80 nsec. or less
Capacity: 1, 2, 4 ,8, 16, or 32 Mbyte
Height: 38 mm (1.5 inches) or less
The following capacity of a SIMM for installing is recommended;:
•1 Mbyte HITACHI HB56D25632B-6A, -7A,
MITSUBISHI MH25632BJ-7
•2 Mbyte HITACHI HB56D51232B-6A, -7A
MITSUBISHI MH51232BJ-7
•4 Mbyte HITACHI HB56A132BV-7A, -7AL, -7B, -7BL
MITSUBISHI MH1M32ADJ-7
•8 Mbyte HITACHI HB56A232BT-7A, -7AL, -7B, -7BL
MITSUBISHI MH2M32EJ-7, MH2M32DJ-7
•16 Mbyte TOSHIBA THM324000BSG-60,-70,-80
•32 Mbyte TOSHIBA THM328020BSG-60,-70,-80
There are available 40 bit output SIMMs for workstations. Such SIMMs do not
fit this printer.
For supply of SIMMs, consult the dealer where you purchased the printer.