Filter
Top Products
CHAPTER 2 PAPER HANDLING
2–9
English: HS3 User’s Guide, Chapter 2
OUTPUT TRAY
The printer ejects paper with the printed surface face up into the output tray at
the front of the printer.
Follow these steps to set the output tray:
1.Pull the tray out from the bottom of the printer.
2.Set the Output Tray wire referring to below figures.
Fig. 2-7 Set the Output Tray
You can stack up to 100 sheets of 80 g/m
2
(20 lb.) paper in the output tray.
❏When you have loaded the paper you want to print on, pull out the Output
Tray and adjust the tray position for the loaded paper as follows otherwise
paper jams might occur:
LGL: Legal Paper
A4: A4 size Paper
LTR: Letter Paper
A4
LGL
LTR
Figure 2-8 Adjust the Out put Tray position