Filter
Top Products
CHAPTER 7 TROUBLESHOOTING
7–1
English: HS3 User’s Guide, Chapter 7
Chapter 7 TROUBLESHOOTING
ALARM INDICATIONS AT A GLANCE
Operator Calls
If a recoverable error occurs, the printer indicates an ‘operator call’ by blinking
the
Alarm
LED and any of the following LEDs. Clear the error as described
below and press the
FF/Cont
button to resume printing.
Blinking LED Error Action
Alarm
❍↔●
Cover Open Close the top cover of the printer.
Paper
❍↔●
Alarm
❍↔●
Paper jam Clear the paper jam referring to the next section
“PAPER JAMS” and press the
FF/Cont
button if the
printer does not automatically resume printing.
Paper empty Load paper in the printer referring to Chapter 2 and
press the
FF/Cont
button.
Misfeed Reinstall the paper and press the
FF/Cont
button.
Ink
❍↔●
Alarm
❍↔●
Ink Empty Ink is empty. Add ink blocks into the printer and
press the
FF/Cont
button.
Filter
❍↔●
Alarm
❍↔●
No Maintenance
cassette or
Maintenance
paper empty
Maintenance paper is empty or Maintenance cassette
is not installed correctly. Replace the maintenance
cassette or re-install the cassette.
If the following errors occur, the printer indicates the error by blinking the
Alarm
LED and printing the error message.
Error Action
Memory Full
Press the
FF/Cont
button to print the data remaining in the printer.
Reduce the resolution or reduce the complexity of your document.
Expand the printer memory by fitting a SIMM module.
SIMM error
Check that the optional SIMM is correctly installed.
✒Note
If the printer does not operate as you expect it to, it is recommended to reset the
printer or turn the printer off and then on again. If you still have problems,
consult your dealer or our authorized service representative.