Filter
Top Products
CHAPTER 7 TROUBLESHOOTING
7–11
English: HS3 User’s Guide, Chapter 7
Printing
Question Recommendation
The printer prints unexpectedly
or it prints garbage.
Reset the printer by pressing the
Reset
button
after turning the printer off-line.
Make sure your application software is correctly
set up to use this printer and check the printer
driver settings or printer settings in your
application software.
The printer cannot print full
pages of a document. A
"Memory Full" error message
occurs.
Expand the printer memory by installing SIMMs.
Reduce the printer resolution.
Reduce the complexity of your document and try
again.
You want to print on both sides
of the paper.
You should NEVER try to print on both sides of the
paper. If you did, contact your dealer or our
authorized service representative.
My headers or footers appear
when I view my document on
screen but do not show up
when I print them.
Most inkjet printers have a restricted area that cannot
be printed on. Usually the first two lines and last two
lines of text cannot print. Adjust the top and bottom
margins in your document to allow for this.
Warning
After you have used the printer, some internal parts of the
printer are extremely hot. When you open the inside cover
of the printer just after using the printer, NEVER touch the
interior of the printer. You need to WAIT 30 MINUTES for
it to cool down.