Brother HS-5000 Printer User Manual


 
CHAPTER 3 PRINTER DRIVER
3–7
English: HS3 User’s Guide, Chapter 2
Power Save Mode
The printer goes into power save mode automatically when the printer has not
received any data or there has not been any key operation for a specified time.
There are two power save modes:
Mode 1 In this mode, the printer keeps the minimum temperature (115°C) at
which the printer ink does not become solid. Power consumption is
higher than Mode 2, but warm-up time is shorter (2 minutes).
Mode 2 In this mode, the printer cools down and power consumption is
almost at the same level as power off. In mode 2, it requires up to 9.5
minutes to warm up.
The factory setting of the Power Save Modes is OFF, but once you turn the Power
Save Mode ON, the default time-out of each mode is set to one hour which meets
the Energy Star power conservation requirements.
Receiving a print file or document or pressing any button automatically wakes up
the printer to start printing.
In this mode setting box, you can set the time-out value from 3 to 99 minutes.
Maintenance
Enter this mode by clicking a menu button and the printer starts head cleaning or
printng the test page.
Color Adjustment
If you want to get the closest color match to your monitor on the printouts, calibrate
the printer for your monitor by clicking this button.
The method used to express color is different between Monitors and Printers.
The monitor uses the 3 primary colors - Red, Green, Blue - to create full colors and
the printer uses 4 colors - Cyan, Magenta, Yellow, and Black to create full colors.
To use this mode, please click the Monitor Calibration button and follow the
instruction. In the first step, you need to select the Advanced mode not the default
Standard mode if you want to adjust each Cyan, Magenta, and Yellow color.