Filter
Top Products
USER’S GUIDE
4–2
English: CS3 User’s Guide, Chapter 4
Data LED
The
Data
LED indicates the current status of the print data process.
LED Printer status
Off ❍
The printer has no print data.
Blinking
❍↔●
The printer is receiving data from the computer or the
printer is processing data in memory.
On ●
Print data remains in the printer memory. If the
Data
LED
is on for a long period of time and nothing has printed,
you need to press the
FF/Cont
button to print the
remaining data.
This LED blinks with the
Alarm
LED to indicate an ink empty error. See
“Adding Ink” in Chapter 6 and “Operator Calls” in Chapter 7.
Manual LED
The
Manual
LED indicates the current paper source.
LED Printer status
Off ❍
Sheet Feeder mode
Blinking
❍↔●
The printer is waiting for paper to be loaded in the manual
feed slot.
On ●
Manual feed mode
This LED blinks with the
Alarm
LED to indicate a Maintenance paper empty or
no Maintenance cassette error. See “Maintenance paper” in Chapter 6 and
“Operator Calls” in Chapter 7.
Alarm LED
The
Alarm
LED blinks to indicate a printer error such as cover open, memory
full or interface error etc. Also, the following combination of LEDs indicate
errors.
Alarm
+
Paper
Paper empty or Paper
Jam
Add paper or Clear paper jam,
and then press the
FF/Cont
button.
Alarm
+
Ink
Ink empty Add ink into the ink reservoir and
then press the
FF/Cont
button.
Alarm
+
Filter
Maintenance paper
empty or No
maintenance cassette
Replace Maintenance paper with a
new one or re-install the
maintenance cassette correctly.