Filter
Top Products
USER’S GUIDE
5–4
English: HS3 User’s Guide, Chapter 5
4. Install as many SIMMs as you need.
• Set the SIMM into the slot at an angle.
• Push the top of the SIMM gently towards the vertical until it clicks into
place.
✒ Notes
When installing SIMMs, be sure to install them in the order slot 1 then slot 2.
When you install different capacities of SIMMs, be sure to install the larger
capacity SIMM in slot 1 and the smaller capacity SIMM in slot 2.
Fig. 5-3 Installing the SIMMs
5. Refit the main controller board and secure it with the 5 screws.
6. Plug in the power cord and turn on the printer.
If you have installed the SIMMs incorrectly, the printer prints a report to alert
you.