Filter
Top Products
USER’S GUIDE
2–8
English: HS3 User’s Guide, Chapter 2
MANUAL FEED SLOT
The sheet feeder also has a manual feed slot. You can manually load paper sheet
by sheet into this slot. You do not need to remove paper from the sheet feeder
when using the manual feed slot.
Refer to “Paper Source” in Chapter 3 for information about settings in the printer
driver.
❏When you want to load one sheet of paper manually:
You do not need to choose manual feed in the printer driver. Place the side of
the paper you wish to print on face up into the manual feed slot. Align the
paper to the center of the manual feed slot, and be sure to insert it fully.
Move the paper guide of the manual feed slot to the paper width you are
using. (Figure 2-6)
❏When you want to load more than one sheet of paper manually:
Choose Manual Feed in the Paper Source section of your printer driver or
application. Follow the instructions above to load the first page. After the
first page is printed, the printer stops and alerts you to load the next sheet into
the manual feed slot by blinking the Manual LED. Load another sheet and
choose OK (on your computer screen) to resume printing. Repeat these steps
until you have finished printing all the pages of your document.
Fig. 2-6 Moving the Paper Guide
✒Note
Insert paper firmly into the manual feed slot.
Only load paper one sheet at a time when using the manual feed slot.