Filter
Top Products
5
INTRODUCTION
12
Brightness
Lets you adjust the
brightness of the whole
image to be lighter or darker.
13
Paper Type
Use this key to temporarily
change the paper type setting
for Copy and Video Printing
modes.
14
Copy Quality
Use this key to temporarily
change the quality and type
of original for Copy and
Video Printing modes.
15
Colour Copy
Makes a full-colour copy.
16
Mono Copy
Makes a black-and-white or
one-colour copy.
17
On/OffLine
Use this key to turn the
printer online (ready to
receive PC data) and offline
(not ready to receive PC
data) alternately. When the
printer is online, the LCD
displays ONLINE.
18
Reset
Clears data from the printer
memory, and then resets and
restores to the factory default
settings.
19
Ink Management
Cleans the ink print heads
and/or resets the ink dot
counter after replacing an
ink cartridge.
20
Priority
When you press this key the
MFC enters printer mode,
and will not print faxes on
paper. Instead, faxes are
stored in the memory until
you press Priority again.
21
Help/Broadcast
Press this key whenever you
want a quick reference Help
List printed. The Help List
shows how to perform
functions, how to register
information, and how to get
basic information. Also use
this key whenever you want
to broadcast faxes to many
different locations,
maximum of 130.
22
Mode
Use to select how the MFC
will handle incoming calls.
23
Resolution
Sets the resolution when you
send a fax.
24
Tel-Index
Lets you look up numbers
stored in the dialling
memory.
25
Ink Empty Indicator
Flashes when ink cartridge is
low and stays lit when ink is
empty.
26
Liquid Crystal
LCD displays messages to
help you set and operate
your MFC.
27
(Right Arrow)
Verify
Moves the LCD cursor to the
right. When the machine is
idle, you can also use this
key to print the Transmission
Verification Report for your
last transmission.
28
(Left Arrow)
Mute
Moves the LCD cursor to the
left. You can also use this
key to put calls on hold.
29
Menu
Lets you access the function
and programming mode.
27
30
Set
Stores a function setting in
the MFC.
31
Clear
Deletes entered data or backs
up one step in function
procedure.