Filter
Top Products
62
CHAPTER SEVEN
If you try to scan in and store a 51st fax, the MFC will send it
immediately, without storing it in memory.
If you get a MEMORY FULL message while scanning the first page of
a fax, press Stop to cancel a scan. If you get a MEMORY FULL
message while scanning in a subsequent page, you'll have the option to
press Start to transmit the pages scanned so far, or to press Stop to
cancel the operation.
Real Time Transmission
When memory is full, the MFC cannot continue to scan documents into
memory before sending. However, you can turn on REAL TIME TX.
Then place the documents in the feeder and enter the fax number. As
soon as the phone line is free, the MFC starts dialling and sending the
fax.
1
Place the document in the feeder.
2
Press Menu, 1, 3, 9. The screen displays
9.REAL TIME TX
3
To change the default setting, press or to select ON (or OFF)
and press Set. Go to Step 5 ––OR–– For the next fax transmission
only, press
or to select NEXT FAX ONLY and press Set.
4
For the next fax only, press or to select ON (or OFF) and
press Set.
5
Press 1 if you want to select additional settings. The display returns
to the SETUP SEND menu ––OR–– Press 2 if you are finished
choosing settings and go to Step 6.
6
Enter fax number and press Start.
See
“Setting
Station ID”
chap. 5
See
“One Touch
and Speed
Dial”
chap. 9