Filter
Top Products
31
ON-SCREEN PROGRAMMING
2. SETUP RECEIVE
Function Description Factory Set Chapter
1. RING DELAY Number of rings before the
RING DELAY:02
6
MFC answers in Fax/Tel,
TOLL SAVER:OFF
Fax or TAD (Message (MFC-740)
Manager for MFC-740) mode.
2. F/T RING TIME
Sets the time for “F/T pseudo ring”
30 6
in Fax/Tel mode.
3. FAX DETECT Receive fax messages without ON 6
pressing the Start key.
4. REMOTE CODE Enter code to activate or OFF 6
deactivate your MFC from a (
51, #51)
remote location.
5. REDUCTION Reduces size of image. AUTO 6
6. MEM. RECEIVE Automatically stores any ON 6
incoming faxes in its memory
if it runs out of paper.
7. POLLING RX You call another fax machine to STANDARD 6
receive a fax from it.
8. PC INTERFACE Turn on if PC is connected to ON
MFC for PC receiving of fax
message.
3. SETUP SEND
Function Description Factory Set Chapter
1.
COVERPG SETUP
Automatically sends a OFF 7
programmable cover page or
prints a sample coverpage.
2.
COVERPAGE NOTE
Program customized message -- 7
for fax cover page.
3. CONTRAST Change the lightness or AUTO 7
darkness of a fax you are
sending.
4. RESOLUTION Allows you to change STANDARD 7
resolutions page by page.
5. OVERSEAS MODE Special setting for international OFF 7
transmissions.
6. CALL RESERVE You can send a fax, then speak OFF 7
to the person operating the
other fax machine or print a
sample call back message.
7. TIMER Set the MFC to send documents -- 7
later.
8. POLLED TX Set Polled Transmission for STANDARD 7
someone to poll your MFC
to receive a fax from you.
9. REAL TIME TX When memory is full, you can OFF
send faxes in real time.
1. Fax Functions (continued)