187
TROUBLESHOOTING AND MAINTENANCE
When the MFC completes the cleaning cycle, the display returns to
Standby mode (date and time).
WARNING
If ink gets in your eyes, irrigate them with water immediately and consult
a doctor if you are concerned.
Caution
■ DO NOT remove ink cartridges if you do not need to replace them.
If you do so, it may reduce the ink quantity and the printer will not
know the quantity of ink left in the cartridge.
■ DO NOT shake the ink cartridges. If you do so, the ink may spill
when you take off the sealing tape.
■ If ink stains your body or clothing, wash with soap or detergent
immediately.
■ If you install an ink cartridge in the wrong colour position, you must
clean the print head several times before you start printing, after
correcting the cartridge installation, because the colours were mixed.
■ Once you open an ink cartridge, install it in the MFC and use it up
within six months of installation. Use unopened ink cartridges within
two years of production.
■ DO NOT refill the ink cartridges. Attempting to use refilled
cartridges may cause damage to the print head and will void your
warranty.
Note: If the INK EMPTY XXXX error message is on the display after
you have installed ink cartridges, check that the ink cartridges are
installed correctly.