Filter
Top Products
84
CHAPTER TEN
Change Fax Forwarding Setting
Press 9 5
then to
Turn Fax Forwarding OFF––Press 1.
Turn Fax Forwarding ON––Press 2.
Program Fax Forward Number––Press 4. The MFC 730 will
automatically turn on Fax Forwarding ON.
Turn Fax Storage ON––Press 6.
Turn Fax Storage OFF––Press 7. (This is only possible if there are no
faxes stored in the memory, or if all faxes have been erased using
Remote Control 9 6 3).
Retrieve a Fax
Press 9 6
then to
Print a Memory Status List––Press 1, then enter the number of remote
fax machine and then press # #, After the beep, hang up and wait.
Retrieve all faxes––Press 2, then enter the number of remote fax
machine and then press # #, After the beep, hang up and wait.
Erase all fax messages––Press 3. If the data stored in the memory has
not been printed before, it will be printed first and then erased.
Check the Receiving Status
Press 9 7
then for
Fax messages––Press 1.
1 long beep––Received messages.
3 short beeps––No messages.
Change Answer Mode
Press 9 8
then for
TAD––Press 1.
Fax/Tel (F/T)––Press 2.
Fax––Press 3.
Exit Remote Operation
Press 9 0