Filter
Top Products
110
CHAPTER THIRTEEN
Before You Install
Multi-Function Link Pro
(For MFC 4650, MFC 6650MC and MFC 7750 Only)
If You Don’t Have a CD-ROM Drive
All software is supplied on CD-ROM. If you need a Floppy Diskette version
(PCI-2DSK), call Brother at 1-888-879-3232 (USA) or 1-800-668-2768
(from within Canada). To order the appropriate set of diskettes, you must
tell the Brother Representative the version of Windows
®
you are using and
your Brother MFC model number. (Only Multi-Function Link Pro and
Visioneer PaperPort LE are available on Floppy Diskette.)
Computer Requirements
The following are the minimum computer requirements you need to set up
and operate the MFC as a printer. Use only a shielded interface cable that is
IEEE-1284 compliant, and that is less than 6 feet (1.8 meters) long.
CPU 80486/66MHz or higher (Windows
®
3.1, 3.11 or
95, 98)
Pentium 75 or Higher (Windows NT
®
Workstation
Version 4.0)
RAM 8MB or greater for Windows
®
3.1 or 3.11
8MB or greater for Windows
®
95, 98
(16MB recommended)
16MB or greater for Windows NT
®
Workstation
Version 4.0 (32MB recommended)
Hard Disk Drive 50MB Available Disk Space CD-ROM1
Operating System Windows
®
3.1, 3.11, 95, 98 or NT
®
Workstation Version
4.0, DOS environment compatible with your Windows
®
version