Filter
Top Products
127
USING THE MFC WITH YOUR COMPUTER
Page Setup Section
Item Default What This Item Does
Paper size*1 Letter Selects the paper size, either “A4”,
“Letter”, “Legal”, “B5”, “DL”, “Executive”
“COM10”,“Monarch”, or “C5”.
Orientation*1 Portrait Selects the paper direction to either
“Portrait” and “Landscape”.
Left Margin *2 Sets the Left Margin value (0-126) columns
Right Margin *2 Sets the Right Margin value (10-136)
columns
Top Margin 0.5" or 0.33" Sets the Top Margin 0", 0.33", 0.5", 1", 1.5”
or 2".
Bottom Margin 0.5" or 0.33" Sets the Bottom Margin 0", 0.33", 0.5", 1",
1.5" or 2".
Line / Page *2 Sets the lines/pages (5-128).
Xoffset 0 Sets the Xoffset (vertical) value from -500
to 500 dots.
Yoffset 0 Sets the Yoffset (horizontal) value from -500
to 500 dots.
*1 These values (except Yoffset and Xoffset) are overidden by settings
within your application software.
*2 These values depend on the paper size settings.
Font Config
Item Default What This Item Does
Font Source Internal “Internal”
Font name Brogham10 Selects a font from any of the printer’s
internal fonts.
Pitch 10 Selects the font size of the selected font.
If you selected the Brougham or LetterGothic
font, Pitch is shown in the selection box.
Symbol Set Roman-8 Selects the symbol set.